In Harmonia Progressio

Publikasi

Publikasi dalam Jurnal Internasional

  1. Imran, I., Mujiman (2009) ” Shear Strengthening of R/C Beams Using AFRP Stirrups With Anchored Ends” Malaysian Journal of Civil Engineering, Vol. 21 (2), December, pp. 152-167
  2. Pane, I., and Hansen, W., (2008), “Investigation of Key Properties Controlling Residual Stress Development in Blended Cement Concrete at Early Ages”, Cement and Concrete Research 38 (11), November, pp. 1325-1335
  3. Pane, I., and Hansen, W., (2008), “Predictions and Verifications of Residual Stress Development in Blended Cement Concrete at Early Ages”, Cement and Concrete Research 38 (11), November, pp. 1315-1324
  4. Pane, I., Fleck, N.A., Chu, D.P., Huber, J.E., (2008) “Predicted Performance of Ferroelectric Memory Capacitors under Mechanical Constraint”, Ferroelectrics 370,  pp. 1-7
  5. Pane, I. Hansen, W., (2008) “Prediction and Verification of Early-Age Stress Development in Hydrating Blended Cement Concrete”, Cement and Concrete Research
  6. Pane, I., Fleck, N.A., Huber, J.E., Chu, D.P., (2008), “Effects of geometry upon the performance of thin film ferroelectric memory”, Int. J. Solids Structures 45 (7-8), pp. 2024-2041.
  7. Zhu, H., Chu, D. P., Fleck, N. A., Pane, I., Huber, J. E., Natori, E. (2007), “Polarization change of PZTN ferroelectric thin films under uniform in-plane tensile stress”, Integrated Ferroelectrics 95, pp. 117 – 127.
  8. Surahman, A., (2007), “Earthquake-Resistant Structural Design Through Energy Demand and Capacity” Earthquake Engineering and Structural Dynamics, Vol. 36, pp. 2099-2117
  9. Pane, I, and Blank, E., (2006) “Role of plasticity on indentation of elastoplastic substrates: relation between surface and subsurface responses”, Int. J. Solids Structures 43, pp. 2014-2036.
  10. Pane, I, and Blank, E., (2005) “Response to loading and stiffness of coated substrates indented by spheres”, Surf.  Coatings Tech. 200, pp. 1761-1767.
  11. Pane, I., and Hansen, W., (2005) “Investigation of blended cement hydration using isothermal calorimetry and thermal analysis”, Cement and Concrete Research 35 (6), pp. 1155-1164.
  12. I. Pane and W. Hansen, (2005) “Investigation of Blended Cement Hydration by Isothermal Calorimetry and Thermal Analysis”, Cem. Concr. Res. 35 (6) pp. 1155–1164.
  13. Pane, I., and Jensen, H.M., (2004) “Plane strain bifurcation and its relation to kink band formation in layered materials”, European Journal of Mechanics/A Solids 23, pp. 359-371.
  14. I. Pane and W. Hansen, (2002) “Concrete Hydration and Mechanical Properties under Nonisothermal Conditions”, ACI J. Mater. 99 (6), pp. 534–542
  15. Pane, I., and Hansen, W., Early age creep and stress relaxation of concrete containing blended cements, Materials and Structures 34 (246), 2002, pp. 92-96.
  16. Imran, I. and Pantazopoulou, S.J. (2001), “Plasticity Model for Concrete under Triaxial Compression”, ASCE Journal of Engineering Mechanics, Vol. 127, No. 3, pp. 281-290.
  17. Mohr, P., Hansen, W., Jensen, E., and Pane, I., (2000) “Transport properties of concrete pavements with excellent long term performance”, Cement and Concrete Research 30 (12), pp. 1903-1910.
  18. Hansen, W., Jensen, K.A., Jensen, E.A., Pane, I., and Mohr, P., (2000) “Evaluation of freeze-thaw durability of concrete pavement with excellent long term performance, Concrete Science and Engineering 2 (8), pp. 182-190.
  19. Pane, I., Hansen, W., and Mohamed, A.R., (1998) “A three dimensional finite element study on effects of nonlinear temperature gradients in rigid pavement”, Transportation Research Record No. 1629
  20. Imran, I. and Pantazopoulou, S.J. (1998). “Discussion: Experimental Study of Plain Concrete under Triaxial Stress.” ACI Material Journal, Vol. 95, No. 2, pp. 194-195.
  21. Suarjana, M., (1998), “Comparison of Preconditioned Conjugate Gradient Method and LDLT Factorization for Structural Analysis”, Computer-Aided Civil and Infrastructure Engineering, Volume 13 Page 289 – March 1998
  22. Imran, I., Pantazopoulou, S.J., (1997), “Experimental Study of Plain Concrete under Triaxial Stress”, ACI materials journal, Vol. 94, Number 6, pages 608-610, American Concrete Institute.
  23. Imran, I., Munaf, D.R., and Pantazopoulou, S.J. (1997). ”Cyclic Behaviour of Plain Concrete Subjected to Multidirectional Compression.” Computational Methods and Experimental Measurement, Computational Mechanics Publications, pp. 205-212.
  24. S. J. Foster, B. Budiono and R. I. Gilbert, (1996) “Rotating crack finite element model for reinforced concrete structures” Computers and Structures, Vol. 58, Issue 1, 3 January 1996, Pages 43-50
  25. Merati, W., Widagdo, P., (1996) “The effects of column stirru and longitudinal beam reinforcement on exterior beam-column joint under cyclic loading”, Computational Methods and Testing for Engineering Integrity, Computational Mechanics Publications, T.V. Duggan (Ed.) IABN 1-85312-412-5, pp 217-226
  26. Imran, I. and Pantazopoulou, S.J. (1996). “Experimental Study of Plain Concrete under Triaxial Stress.” ACI Material Journal, Vol. 93, No.6, pp. 589-601.
  27. Surahman, A., and Merati W., (1996), “Mechanical Behaviour of Fly Ash Concrete”, Computational Methods and Testing for Engineering Integrity, T. V., Duggan (Ed.), Computational Mechanics Publications, ISBN 1-85312-412-5, pp 37-44
  28. M Suarjana, KH Law – (1995) “A Robust Incomplete Factorization Based on Value and Space Constraints”, International Journal For Numerical Methods in Engineeri
  29. Suarjana, M., Law, K.H., (1994) “Successive conjugate gradient methods for structural analysis with multiple load cases” International Journal for Numerical Methods in Engineering
  30. Setio, H. D. and Jezéquel, L. (1994), “Double component modal synthesis methods. Part I: Theory of hybrid models” Journal of Applied Mechanics, Trans. ASME, vol. 61, pp. 100-108.
  31. Setio, H. D. and Jezéquel, L. (1994), “Double component modal synthesis methods. Part II: Numerical tests and experimental identification of hybrid models” Journal of Applied Mechanics, Trans. ASME, vol. 61, pp. 109-116.
  32. Jezequel, L., Setio, H.D., (1994) “Component modal synthesis methods based on hybrid models, Part I: Theory of hybrid models and modal truncation methods”, Journal of Applied Mechanics ASME, 61, 100-108, 1994.
  33. Setio, S., Setio, H.D. and Jezéquel, L. (1992), “A Method of Non-Linear Modal Identification from Frequency Response Tests” Journal of Sound and Vibration, pp. 497-515, 158(3).
  34. Setio, S., Setio, H.D., Jezequel, L., (1992) “Modal analysis of nonlinear multi-degree-of-freedom structures” International Journal of Analytical and Experimental Modal Analysis. Vol. 7, no. 2, pp. 75-93. Apr
  35. Pantazopoulou, S.J. and Imran, I. (1992). “Slab-Wall Connections under Lateral Loads.” ACI Structural Journal, Vol. 89, No. 5, pp.515-527.
  36. Tang W.H., Sidi, I., Gilbert R.B., (1989), “Average Property in Random Two-State Medium”, Journal of Engineering Mechanics, Vol. 115, No. 1, Januari, pp. 131-144
  37. Chowdhury R. N. , Tang W. H.,  Sidi I. (1987), “Reliability Model of Progressive Slope Faikure = Medele Probabiliste de la Rupture Progressive Des Pantes”, Geotechnique Journal, Vol. 37, No. 4, pp. 467-481, ISSN 0016-8505
  38. Haber, R.B., Hariandja, B., (1985) “Computational strategies for nonlinear and fracture mechanics problems” Computers and Structures
  39. Haber, R.B., Hariandja, B., (1985) “An Eulerian-Lagrangian finite element approach to large-deformation frictional contact” Computers and Structures, (ISSN 0045-7949). Vol. 20, no. 1-3, pp. 193-201
  40. Surahman, A. and Rojiani, K.B., (1984) “Closure of Reliability Based Optimum Design of Concrete Frames”, Journal of Structural Engineering, Vol 110, No. 3, March, pp. 671-672
  41. Surahman, A. and Rojiani, K.B., (1983) “Reliability Based Optimum Design of Concrete Frames”, Journal of Structural Engineering, ASCE, Vol 109, No. 3, pp. 741-757

Publikasi dalam Jurnal Ilmiah Nasional

  1. Imran, I., Aryanto, A., (2009) ”Pengaruh Pemodelan Zona Terkekang Terhadap Prediksi Hubungan Momen-Kurvatur Kolom Persegi Beton Mutu Tinggi” The Civil Engineering Dimension (Dimensi Teknik Sipil) Universitas Petra, Vol. 11, No. 2, September
  2. Setio, H.D., Bawono, D., A., Setio, S., (2009) ”Studi Perawatan Jaringan Jalan Rel Kereta Api Berbasis Kehandalan (RCM), Dinamika Teknik Sipil, Vol 9, No. 2., hal. 163-173, ISSN: 1411-8904
  3. Ashad, H., Nasution, A., Imran, I., Soegiri, S., (2008) “Optimisasi Bubuk Slag Nikel dengan Sistem Ternary C-A-S”, Jurnal Teknik Sipil, Vol. 15, No. 3, Desember, hal. 123-132, (ISSN 0853-2982)
  4. Andayani, S.W., Imran, I. (2008) ”Pengaruh Kopolimer Lateks Alam Styrena Terhadap Umur Layan Konstruksi”, Berita Teknologi Bahan dan Barang Teknik, No. 22/2008, hal. 40-44, (ISSN 0852-0615)
  5. Setio, H.D., Widarbo, R., Patta, P.R., (2008), ” Kontrol Vibrasi Aktif pada Struktur yang Mengalami Beban Dinamik dengan Menggunakan Jaringan Saraf Tiruan dan Algoritma Genetik”, Dinamika Teknik Sipil”, Majalah Ilmiah Teknik Sipil, ISSN 1411-8904, Juli, Terakreditasi, 55a/DIKTI/Kep/2006
  6. Ashad, H., Nasution, A., Imran, I., Soegiri, S., (2008) “Kontribusi Bubuk Slag Nikel di dalam Meminimalkan Dampak Intrusi Mikroorganisme terhadap Perilaku Fisik Material Beton”, Jurnal Teknik Sipil, Vol. 15, No. 1, April, hal. 1-13, (ISSN 0853-2982)
  7. Pane, I., (2008) ”Kekuatan Riset Multiskala dalam Membentuk Teknologi Infrastruktur Masa Depan”, Jurnal Teknik Sipil, Vol. 15, No. 1, April, hal.27-33 (ISSN 0853-2982)
  8. Wicaksono, A. S., Johan, Kusumastuti, D., Rildova, (2007) “Efektifitas Multiple Tuned Mass Dampers (MTMD) Dalam mereduksi Respons Struktur Akibat Beban Gempa”, Jurnal Infrastruktur dan Lingkungan Binaan, Volume III No. 2, Desember, pp. 99-104, Institut Teknologi Bandung, Indonesia
  9. Irsyam, M., Dangkua, D.T., Kusumastuti, D., Kertapati, E.K., (2007) “Methodology of Site Specific Seismic Hazard Analysis for Important Civil Structure”, Civil Engineering Dimension, Journal of Engineering Science and Application, Volume 9, Number 2, September, pp. 103-111, Petra Christian University, Indonesia.
  10. Sugiri, S., Idris, K., Setio, H.D., Yulianti, R.C., (2007) “Studi Eksperimental dan Analisis Numerik Perilaku Mekanik Pipa Lepas Pantai dengan Terak Nikel Sebagai Agregat dan Fly Ash Sebagai Substitusi Parsial Semen” Jurnal Itenas, No. 2, Vol. 11, Juni-Agustus, ISSN:1410-3125, hal. 74-83
  11. Setio, H.D., Bawono, DA., Setio S., ” Perawatan Berbasis Keandalan (RCM) untuk Jaringan Jalan Rel Kereta Api “, Jurnal Dinamika Teknik Sipil, UMS, Solo
  12. Sugiri, S., Saloma, (2007) “Persamaan Korelasi Sifat Mekanik Beton Mutu Tinggi dengan Agregat Alami dan Slag Nikel” Jurnal Teknik Sipil ITB, Vol 14 No. 1, Januari, ISSN 0853-2982, hal. 27-39
  13. Ashad, H., Nasution, A., Imran, I., Soegiri, S., (2006) ”Degradasi Kekuatan Beton Akibat Intrusi Mikroorganisme” Jurnal Teknik Sipil ITB, Vol. 13 No. 3, Juli, hal. 151-158 (ISSN 0853-2952)
  14. Imran, I., Suarjana, M., Hoedajanto, D., Soemardi, B., Abduh, M., (2006). ”Beberapa Pelajaran dari Gempa Yogyakarta; Tinjauan Kinerja Struktur Bangunan Gedung, Jurnal HAKI, Vol. 7, No. 1, hal. 1-13 (ISSN No. 0216/5457)
  15. Imran, I., Mujiman, (2006). ”Studi Eksperimental Perkuatan Geser Balok Menggunakan FRP yang Kedua Ujungnya Diangkur”, Jurnal Teknik Sipil UNPAR, Juni, Vol 7 No. 1, hal. 67-84 (ISSN-1411-5360)
  16. Soegiri, S., (2005) ”Penggunaan Terak Nikel sebagai Agregat Beton Pemberat Pipa Gas Lepas Pantai” Jurnal Teknik Sipil, Vol. 12 No. 4, Oktober, hal. 241-247 (ISSN 0853-2952)
  17. Soegiri, S., (2005) ”Penggunaan Terak Nikel sebagai Agregat dan Campuran Semen untuk Beton Mutu Tinggi” Jurnal Infrastruktur dan Lingkungan Binaan, Vol. 1 No. 1, Juni, hal. 27-34 (ISSN 0853-2952)
  18. Imran, I., Cornelis, R., (2005) ”Pengaruh Pemodelan Zona Terkekang Terhadap Prediksi Hubungan Momen-Kurvatur  Kolom Persegi Beton Mutu Tinggi”, Jurnal Teknik Sipil ITB, April, Vol. 12, No. 2 hal. 75-86 (ISSN 0853-2952)
  19. Setiati, N.R., Imran, I., (2004) “Analisis Program Perilaku Kolom Komposit Berdasarkan Kriteria Leleh”, Jurnal Litbang Jalan, Vol. 21 No. 3, September, hal. 45-53, (ISSN 0216-4124)
  20. Imran, I., Purwadaria, S., Sulistyono, S., (2004) ”Performance of Galvashield as a Sacrificial Anode in Protecting Embedded Reinforcing Bars from Corrosion in Chloride Environment”, CSSC Journal, Vol. 5, Number 1, June, pp. 1-13, ISSN 1411-3406
  21. Setiati, N.R., Imran, I., (2004) “Perkuatan Struktur Kolom Beton Bertulang dengan Menggunakan Lapisan Feber”, Jurnal Litbang Jalan, Vol. 21 No. 1, Maret, hal. 51-58, (ISSN 0216-4124)
  22. Kristianto, A., Imran, I., Purwadaria, S., (2003), “Efek Arus Berlebih Proteksi Katodik Terhadap Penurunan Kekuatan Lekatan Antara Baja Tulangan dan Beton”, Jurnal Teknik Sipil, Universitas Kristen Maranatha, Oktober, Vol. 1 Nomor 1, hal. 1-19, (ISSN 1411-9331)
  23. Imran, I., Suharwanto, Moestopo, M., dan Brahmantyo, D., (2001), “Stress-strain Response of Confined High Strength Concrete”, Jurnal Teknik Sipil ITB, Juli, Vol. 8, No.3, hal.134-144
  24. Imran, I., Hanafiah, dan Kamaludin (1998). “Behaviour of Connections in the Precast Concrete Beam-Column Assembly under Cyclic Load.” Journal of Civil Engineering of ITB, Vol. 5, No. 4 (In Indonesian), pp. 177-189.
  25. Imran, I., Munaf, D. R., dan Nuroji. (1998). “Bond Behaviour of Reinforcing Bars Embedded in High Strength Concrete.” Journal of Civil Engineering of ITB, Vol. 5, No. 2 (In Indonesian), pp.  87-98.

Makalah yang Pernah Disajikan pada Seminar Internasional

  1. Muin, R., B., Nasution, A., (2009) “Shear Deformation and Inertia Rotary Effects on the Large Offshore Structure Natural Frequencies”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 83-89 , ISBN: 978-979-98278-2-1
  2. Sugiri, S., Setio, H.D., Pane, I., Naitutu, A. N., (2009) “Experimental Studies of Mortar Geopolymer Based on Low Calcium Fly Ash (Type F)”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 130-140, ISBN: 978-979-98278-2-1
  3. Setio, H.D., (2009) “Base Isolation of Structures Using Hysteretic Non-Linear Passive Damper”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 76-81, ISBN: 978-979-98278-2-1
  4. Irsyam, M., Asrurifak, M., Budiono, B., Triyoso, W., Merati, I G.W., Sengara, I. W., Firmanti, A., (2009) “Development of Spectral Hazard Map for Indonesia Using Probabilistic Method by Considering Difference Values of Mmax for Shallow Background Sources”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 17-23, ISBN: 978-979-98278-2-1
  5. Moestopo, M., Novan, A., (2009) “Proposed Sustainable Steel Structures in Seismic Region”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 117-122, ISBN: 978-979-98278-2-1
  6. Imran, I., Eddy, L., Mujiono, Fadilla, E., (2009) “Experimental Study on Column to Column Connections of Precast Concrete System Using Sleeve Type of Connections”, proceeding The 1st International Conference on Sustainable Infrastructure and Built Environment in Developing Countries, Sabuga ITB, Bandung, 2nd-3rd November, pp. 95-101, ISBN: 978-979-98278-2-1
  7. Imran, I., (2009) “Assessment and Repair/Strengthening of a Settlement Damaged Office Building” proceeding 1st ICRMCE, Solo, 21-22 March
  8. Setio, H.D., Widarbo, R., Patta, P. R., Setio, S.,  (2008) “Smart Structure Under Dynamic Loading”, Proceeding The Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11), Taiwan, 19-21 November
  9. Setio, H.D., Sitanggang, E., Sugiri, S.,  (2008) “Pendulum Tuned Mass Damper for Reducing Structural Response of MDOF System Excited by Earthquake”, Proceeding The Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11), Taiwan, 19-21 November
  10. Imran, I., Aryanto, A., (2008) “Experimental Study on The Behaviour of RC Frames in Filled With Lightweight Materials”, The 11th EASEC, 19-21 November, NTU, Taiwan
  11. Imran, I., Retika, A.C., Simatupang, R., (2008) “Mechanical Characteristics of Steel Rebars Available in Indonesian Industries”, The 11th EASEC, 19-21 November, NTU, Taiwan
  12. Kusumastuti, D., Pribadi, K.S., Rildova, (2008) “Reducing Earthquake Vulnerability of Non Engineered Buildings: Case Study of Retrofitting of School Building in Indonesia”, 14th WCEE, Beijing, 12-17 October
  13. Rildova, Kusumastuti, D., (2008) “Effect of Structural Variation on the Performance of MTMD as Seismic Control Response Device”, 14th WCEE, Beijing, 12-17 October
  14. Pribadi, K.S., Kusumastuti, D., Rildova, (2008) “Learning from Recent Indonesian Earthquakes: An Overview to Improve Structural Performance”, 14th WCEE, Beijing, 12-17 October
  15. Handayani, N., Kusumastuti, D., Rildova, (20080 “An Experimental Study on MTMD to Improve Structural Performance under Dynamic Loading”, 14th WCEE, Beijing, 12-17 October
  16. Okazaki, K., Narafu, T., Kusumastuti, D., Pribadi, K.S., (2008) “Reconstruction Practices in Aceh after 2004 Tsunami Disaster”, 14th WCEE, Beijing, 12-17 October
  17. Pane, I., (2008) “Lateral ductility and strength of column-flat slab systems incorporating the role of masonry infill walls”, 14th World Conference on Earthquake Engineering, Beijing, October.
  18. Pane, I., (2008) “Ductile design of mansory infilled RC frame for earthquake resistant structure”, 14th World Conference on Earthquake Engineering, Beijing, October
  19. Suarjana, M., Sengara, I W., (2008) “Lessons Learned from Yogya and Aceh Recovery Program”, The 14th World Conference on Earthquake Engineering, 12-17 October, Beijing, China
  20. Surahman, A. (2008), “Probabilistic Seismic Hazard Assessment and Structural Performance Against Seismic Actions” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  21. Pribadi, K.S., Kusumastuti, D., Utami, A. (2008), “Earthquake Risk Perception in Indonesia Government Officers and Builders View” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  22. Suarjana, M., Sengara, I.W. (2008), “Structural Assessment and Redesign of Housing for Reconstruction after Yogya Earthquake” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  23. Djauhari, Z., Imran, I. (2008), “Study of Confinement Models for High-Strength Concrete Columns Confined by High-Strength Steel” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  24. Haris, A., Nasution, A. (2008), “Seismic Resistance of Low Rise Building” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  25. Sugihardjo, H., Merati, W., Surahman, A., Moestopo, M., (2008), “Inelastic Behaviour of Ductile Buckling-Restrained Braced Truss-Girders Moment Frame” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  26. Moestopo, M., Kusumastuti, D., Novan, A., (2008), “Inproved Performance of Bolt-Connected Link Due to Cyclic Load” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  27. Setio, H.D., Setio, S., (2008), “Active Vibration Control for Structure Having Non-Linear Behaviour under Earthquake Excitation” Intenational Conference on Earthquake Engineering and Disaster Mitigation (ICEEDM08), April 14-15, Jakarta, Indonesia
  28. Pane, I., Huber, J.E., (2008) “Roles of substrate and film properties upon remnant polarisation and coercive field of ferroelectric thin film memory, 15th International Symp. Smart Structures and Materials, San Diego March, Proc. SPIE 6926.
  29. Rildova, Kusumastuti, D. (2007) “Application of Multiple Tuned Mass Dampers in Reducing Response of Buildings”, Proceeding The 8th Pacific Conference on Earthquake Engineering (8PCEE), 5-7 Desember 2007, Singapore
  30. Kusumastuti, D., Budiono, B., Setio, H.D., Iskandar, (2007) “The Behavior of RC Beam-Composite Column Joint Under Cyclic Loading”, Proceeding The 8th Pacific Conference on Earthquake Engineering (8PCEE), 5-7 Desember, Singapore
  31. Rildova, Kusumastuti, D., Handayani, N., (2007) “Optimal Placement of Multiple Tuned Mass Dampers to Improve Structural Performance of Buildings under Earthquake Excitation”, Proceeding The 1st International Conference of European Asian Civil Engineering Forum (EACEF), 26-27 September, UPH, Karawaci, Jakarta
  32. Iskandar, Budiono, B., Kusumastuti, D., Setio, H.D., (2007) “Non-linear Finite Element Analysis of RC Beam-Composite Column Joint Under Cyclic Loading” Proceeding European Asian Civil Engineering Forum, The International Conference at the Universitas Pelita Harapan, Jakarta, 26-27 September
  33. Surahman, A., (2007) “Earthquake Resistant Structural Design Through Energy Demand and Capacity” Earthquake Engineering and Structural Dynamics, Wiley InterScience
  34. Imran, I., (2007) “Sustainability Aspects in the Design of Concrete Materials and Structures: Consideration of Durability in Design Practice” Prosiding Indonesia International Cement and Concrete Forum (IICCF 2007), 20-22 November
  35. Pane, I., (2007) “Predicted performance of ferroelectric memory capacitors under mechanical constraint”, 11th European Meeting on Ferroelectricity, Bled, Slovenia, September
  36. Setio, H.D; Kusuma, S., Setio S., (2007) “Structural Response Measurement : A Key to Advanced Diagnostic of Structural Damage “, Proceeding The Future Develompment In Structural and Engineering Based on Research and  Practical Experience, UPH, Jakarta, 26-27 September
  37. Setio H.D., Setio S. (2007) ” A Compore Studi af an Active and Passive Control Syatem of Building Structures Excited by Seismic  Loadings “, Proceeding The Future Development in Structual and Civil Engineering Based on Research and Practical Experience, UPH, Jakarta, 26-27 September
  38. Setio H.D., Bawono , D.A. Setio S. (2007) ” Reliability Centered  Maintenance for Railway Networks “, Proceeding The Future Development in Structual and Civil Engineering Based on Research and Practical Experience, UPH, Jakarta, 26-27 September
  39. Setio H.D., Setio S., (2007) ” An Experimental Study of Structural Damage Identification Using Meural Networks Approach “, Compendium of Papers, Aun/Seed-Net Field-Wise Seminar in Civil Engineering, Chulalongkorn University, Bangkok, Thailand, 1-2 November
  40. Imran, I., (2007) “The 6 March 2007 West Sumatera Earthquake-Lesson Learned and Recommendations”, Prosiding The International Symposium on Disaster in Indonesia (ISDI): Problem and Solution, Padang, 26-28 Juli
  41. Zhu, H., Chu, D.P., Fleck, N.A., Pane, I., Kijima, T., Natori, E., (2007) “Polarisation change of PZT ferroelectric thin film capacitors under tensile stress”, submitted to Int. Symposium Integ. Ferroelectrics, Bordeaux, May.
  42. Hoedajanto, D., Surono, A. (2006) “Earthquake-Resistant Design of Tall Buildings with Basement and Deep Foundation on Soft Soil”, 2nd Asian Concrete Federation (ACF) International Conference, Bali, Indonesia, 20-21 November, pp. RPP 21
  43. Imran, I., Setiati, N.R., (2006) “Behavior of Short Columns Confined Externally with Aramid Fiber Wrap”, 2nd Asian Concrete Federation (ACF) International Conference, Bali, Indonesia, 20-21 November, pp. MRC-10
  44. Soegiarso, R., Imran, I., Silven (2006) “The Design and Construction Aspects of Cisomang Bridge”, 2nd Asian Concrete Federation (ACF) International Conference, Bali, Indonesia, 20-21 November, pp. FRP-6
  45. Sugiri, S., Saloma (2006) “Similar Properties of High Performance Concrete Using Fly Ash and Silica Fume as Partial Substitution in Cement with Different Aggregates”, 2nd Asian Concrete Federation (ACF) International Conference, Bali, Indonesia, 20-21 November, pp. HSP-2
  46. Imran I., Mujiman (2006) “Shear Strengthening of R/C Beams Using AFRP Sheet with Anchored Ends”, Asia Pasific Structural Engineering and Construction Conference (APSEC 2006), Johor Bahru, Malaysia, 5-6  September, hal. A-15
  47. Suarjana M., Hendra C., (2006) “Reliability based inspection planning of jacket offshore platform”, The Tenth East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-10), Bangkok, 3-5, pp.
  48. Kusumastuti D., Rildova (2006) “Seismic Performance of Structures with Multiple Tuned Mass Dampers”, Proceeding of The Tenth East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-10), Bangkok, 3-5 August, pp.
  49. Tjondro, J.A., Suryoatmono, B., Imran, I. (2006) “Dowel Bearing Strength of Indonesian-Wood Species”, Proceeding of The Tenth East Asia-Pacific Conference on Structural Engineering & Construction (EASEC-10), Bangkok, 3-5 August, pp. 153-158 (ISBN974-8257-17-7)
  50. Pane, I., and Blank, E., Simulation of fracture initiation in sliding contact of brittle coatings on elastoplastic Substrates, 8th Int. Cong. Num. Meth. Industrial Forming Process/NUMIFORM, Colombus, Ohio, June, 2004.
  51. Pane, I., and Hansen, W., Surface characterization of blended cements by water and nitrogen sorption isotherms, Int. Symposium: Advances in Concrete through Science and Engineering, Northwestern Univ., Illinois, March, 2004.
  52. Peng, Y., Hansen, W., Borgnakke, C., Pane, I., Roumain, J.C., and Biernacki, J., Thermo-kinetics of cement hydration – temperature effect and activation energy, Int. Symposium: Advances in Concrete through Science and Engineering, Northwestern Univ., Illinois, March, 2004.
  53. Setio, H.D., Setio, S., (2003), “Active Control of Non-Linear Multi Degree of Freedom System Using Artificial Neural Network”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. VID-20
  54. Setio, H.D., (2003), “Neuro-Fuxxy Control of Building Structure Using an Active Mass Damper: An Experimental Study”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. VID-21
  55. Imran, I., Purwadaria, S., Sulistyono, S., (2003), “Assessment on the Effectiveness of Galvashield as a Sacrificial Anode for Reinforcing Bars”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. RCS-31
  56. Adiyastuti, S.M., Gowripalan, N., Imran, I., (2003), “Influence of Cracks on Chloride Diffusivity of Reinforced Concrete Beams”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. CMT-15
  57. Suhud, R., Imran, I., (2003), “Partially Presstressed Concrete: Review and Application in Indonesia”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. RCS-32
  58. Suarjana, M., Wibowo, A., (2003), “Coupling of Finite Element and Boundary Element Methods for Structural Analysis of Shear Wall – Frame Building”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. CPM-1
  59. Madutujuh, N., Hoedajanto, D., (2003), “Progress of Structural Design Software in Indonesia”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. CPM-21
  60. Mangkoesoebroto, S.P., Goto, Tetsuro, Khadavi, (2003), “Experimental Investigation of Full-Scale Confined Masonry in Reversed Cyclic Loading”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. MTS-3
  61. Mangkoesoebroto, S.P., Surahman, A., Batubara, S., Irawan, P., (2003), “Investigation of Full-Scale Concrete Beam-Column Sub-Assembly”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. RCS-26
  62. Budiono, B., Purwadi H., (2003), “The Non Linear Behaviour Multi-Storey Open Frame Structures under Major Earthquake Load”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. SME-11
  63. Mangkoesoebroto, S.P., (2003), “Seismic Design of Structures by Performance Based: Indonesian Code Point of View (SNI-1726)”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. SME-12
  64. Hoedajanto, D., MacRae, G. A., (2003), “Use of Pushover Analysis in Performance Based Design in Multistory Buildings”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. SME-19
  65. Moestopo, M., Khairullah, (2003), “On Improved Performance of Eccentrically Braced Frames”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. SSM-17
  66. Soegiri, S., Soemardi, B.W., Nurjannah, S.A., (2003), “Behaviour of Repaired Beam Column Exterior Joint Under Cyclic Loading with Prepack Aggregate Concrete Method”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. MMR-21
  67. Thamrin, A.H., Riyansyah, M., Hoedajanto, D., (2003), “The Effect of Foundation System Modeling to the Calculated Drift  Capasity of Single Column Bridge Structure”, Proceeding of the Ninth East Asia-Pacific Conference on Structural Engineering and Construction, Embracing the Challenges in the 21st Century, Bali, Indonesia,16 – 18 December, pp. BGE-17
  68. Imran, I., Simatupang, P.H., Poernomo, S., Tan, G., (2003), “Experimental Study on the Shear-Strengthened R/C Beams Wrapped with Aramid Fiber Sheet”, Proceeding of the 5th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2003), Johor Baru, Malaysia, 26-28 August, pp. 233-241
  69. Hoedajanto, D., Imran I., (2002) The Practice of Concrete Engineering in Indonesia, Proceedings of Asian Concrete Forum Symposium, Seoul, Korea, pp.107-113
    Kusumastuti, D., Reinhorn, A.M., (2002),”Development of Benchmark Model for Irregular Structure”, Proceeding of KEERC-MCEER Joint Seminar on Contributions to Earthkuake Engineering, Buffalo, July 30-August 1
  70. Imran, I., Purwadaria, S., Kristianto, A., (2002), “Effect of Excessive Current from Cathodic Protection on Bond Strength of Reinforcing Bar”, Proceeding of International Conference on Advancement in Design, Construction, Construction Management and Maintenance of Building Structures, BICC-Bali, 27-28 March, pp. IV-12 – IV-22.
  71. Mubarok, M.Z., Imran, I., Purwadaria, S., (2002), “Prediction of Corrosion Initiation Period of Reinforcing Steel Bars in Marine Concrete Structures Exposed in Splash and Tidal Zones”, Proceeding of International Conference on Advancement in Design, Construction, Construction Management and Maintenance of Building Structures, BICC-Bali, 27-28 March, pp. IV- 29 – IV-39.
  72. Pane, I., and Hansen, W., (2002) ”Early age stress-hydration kinetics and thermomechanics,” Proc. ACI Symp. SP-206, Concrete: Materials Science to Application, A Tribute to S. P. Shah, , pp. 293-302.
  73. Pane, I., and Hansen, W., (2001) “Early age creep and stress relaxation of concrete containing blended cements, RILEM Conf. On Early Age Cracking in Cementitious Systems, Haifa, Israel, March.
  74. Pane, I., and Hansen, W., (2001) “Properties of tensile creep and relaxation of concrete containing blended cements”, 6th Int. Conf. on Creep, Shrinkage, and Durability Mech. of Concrete at MIT, Cambridge, August
  75. Imran, I., Poernomo, S., (2001). “Material for Underwater Concrete/Repair”, Prosiding pada Seminar Internasional High Performance Concrete & Underwater Concreting, hal. 87 – 98, Jakarta 6 Maret.
  76. Mubarok, M.Z., Imran, I., Purwadaria, S., (2000). “On the Use of Finite Difference Method in Predicting time Required To Initiative Corrosion on Reinforcing Steel Bars Submerged in Seawater”, Proceeding of the Second Asia/Pasific Conference on Durability of Building Systems: Harmonised Standards and Evaluation, Vol. II, pp.27.1 – 27.11, ITB – Bandung,  10 – 12 Juli.
  77. Imran, I., and Brahmantyo, D. (1999). “Constitutive Model for Confined High Strength Concrete.” Proceedings of the First International Conference on Advances in Structural Engineering and Mechanics (ASEM-99), pp. 367 – 372.
  78. Imran, I., Moestopo, M., and Suharwanto (1999). “Strength and Deformation of Confined High Strength Concrete.” Proceedings of the First International Conference on Advances in Structural Engineering and Mechanics (ASEM-99), 373 – 378.
  79. Imran, I., Moestopo, M., and Suharwanto (1998). “Mechanical Behaviour of High Plain Strength Concrete under Triaxial Compression.” Proceedings: The 7th International Expertcentrum Conference on Non-Destructive Testing and Experimental Stress Analysis of Concrete Structures, Expertcentrum, Bratislava, pp. 70-75.
  80. Imran, I., Munaf, D.R., and Pantazopoulou, S.J. (1997). ”Cyclic Behaviour of Plain Concrete Subjected to Multidirectional Compression.” Proceedings: Computational Methods and Experimental Measurement, Computational Mechanics Publications, Greece, pp. 205-212.

Makalah yang Pernah Disajikan pada Seminar Nasional

  1. Hoedajanto D., Mutia, D., (2008),“Kecenderungan perkembangan Konsep perencanaan struktur Tahan Gempa di Dunia”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 2
  2. Djauhari, Z., Imran, I., (2008), “Perilaku Lentur Beton Mutu Tinggi Yang Dikekang Dengan Baja Mutu Tinggi”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 12
  3. Imran, I., Yuliari, E., Suhelda, Kristianto, A., (2008), “Aplicability Metoda Desain Kapasitas pada Perancangan Struktur Dinding Geser Beton Bertulang”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 18
  4. Budiono, B., Wibowo, F., (2008), “Analisis Kapasitas Struktur dengan Incremental Dynamic Analysis (IDA) & Pendekatan Modal Pushover Analysis (MPA) Struktur Beton Bertulang”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 20
  5. Budiono, B., Permana, E., (2008), “Analisa Struktur Daktail pada Struktur Portal Terbuka dan Sistem Ganda dengan Metoda Kekakuan Sekan”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 21
  6. Madutujuh, N., Suryoatmono, B., Imran, I., (2008), “Pengaruh Pengaku tengah dalam meningkatkan Kuat Tekan Penampang Baja Ringan: Studi Analitis dan Eksperimental”, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 23
  7. Mangkoesoebroto, S.P., (2008), “Uncorrelated Synthetic Grounds Motions Compatible with SNI 03-1726-2003 Design Spectra“, Proceeding Seminar HAKI-’Pengaruh Gempa & Angin Terhadap Struktur’, 19-21 Agustus 2008, Hotel Borobudur, Jakarta-Indonesia, ISBN: 978-979-98441-9-4, h. 30
  8. Imran I., Simatupang, R., Pamujie, E., Gunawan, M., (2006) “Pengaruh Jenis Baja Tulangan terhadap Perilaku Plastifikasi Elemen Struktur SRPMK”, Proseeding Seminar dan Pameran Teknik HAKI 2006, Jakarta 24 Agustus
  9. Irsyam M., Dangkua D., Kusumastuti D. (2006) “Seismic Design Criteria for Suramadu Cable Stayed Bridge”, Seminar HAKI 2006, Jakarta, 22-23 Agustus, hal. 25
  10. Imran I., Suarjana M., Hamidah M., Erwin, Rashad S. (2006) “Perilaku Pelat Komposit Alkadeck: Studi Experimental dan Analitical”, Seminar HAKI 2006, Jakarta 22-23 Agustus, hal. 23
  11. Budiono B., Goro Y.R. (2006) “Respon Non-Linier Struktur Beton Bertulang Akibat Beban Gempa Kuat Standar FEMA 273 dan ATC 40″, Seminar HAKI 2006, Jakarta 22-23 Agustus, hal. 18
  12. Surono A., Hoedajanto D. (2006) “Studi Parameter dari Perilaku Dinamik Struktur Menara di Atas Tanah Sangat Lunak”, Seminar HAKI 2006, Jakarta, 22-24 Agustus, hal. 16
  13. Mangkoesoebroto S.P., Santoso A.M. (2006) “Seismic Re-evaluation of Complex Building Structure Using Pushover Analysis With Consideration of Higher Modes” Seminar HAKI, Jakarta 22-24 Agustus, hal. 14
  14. Moestopo M., Mirza A. (2006) “Kinerja Link dengan Sambungan Baut pada Struktur Rangka Berpangku Eksentrik”, Seminar HAKI 2006, Jakarta 22-23 Agustus, hal. 12
  15. Imran I., Simatupang R., Pamujie E., Gunawan M. (2006) “Pengaruh Jenis Baja Tulangan Terhadap Perilaku Plastifikasi Elemen Struktur”, Seminar HAKI 2006, Jakarta 22-23 Agustus, hal. 11
  16. Hoedajanto, D. (2006) “Etika Profesi Dalam Karya Konstruksi”, Seminar HAKI 2006, Jakarta 22-23 Agustus, hal. 1
  17. Moestopo M. (2006), “Materi Pengajaran Konstruksi Baja”, Prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, UNUD, Bali, 26-27 Juli
  18. Imran I. (2006), “Perkuliahan Struktur Beton Sebagai Sarana Diseminasi Peraturan Beton Indonesia”, Prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, UNUD, Bali, 26-27 Juli
  19. Darmawan S. (2006), “Pengajaran Mata Kuliah Mekanika Bahan”, Prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, UNUD, Bali, 26-27 Juli
  20. Surono, A., Hoedajanto, D., (2006) “Perhitungan Kuat Minimum Perlu untuk Elemen Balok Beton Prategang pada Gedung Tahan Gempa”, Seminar HAKI, Medan
  21. Suarjana, M., (2006). “Baja Kinerja Tinggi untuk Jembatan”, Prosiding Seminar Sehari Steel Based: Building & Infrastructure, Krakatau Steel Group, Jakarta 21 Juni
  22. Moestopo, M., (2006). “Ketentuan Mengenai Bahan Baja pada Perencanaan Struktur Baja untuk Bangunan Gedung”, Prosiding Seminar Sehari Steel Based: Building & Infrastructure, Krakatau Steel Group, Jakarta 21 Juni
  23. Hoedajanto, D.., (2006). “Pipa Baja sebagai Material Struktur dalam Konstruksi Bangunan Offshore & Bangunan Lainnya”, Prosiding Seminar Sehari Steel Based: Building & Infrastructure, Krakatau Steel Group, Jakarta 21 Juni
  24. Imran, I., Simatupang, R., (2006). “Aplikasi Baja Tulangan Paduan Rendah Pada Struktur Bangunan Tahan Gempa”, Prosiding Seminar Sehari Steel Based: Building & Infrastructure, Krakatau Steel Group, Jakarta 21 Juni
  25. Hoedajanto D., (2006), “Belajar dari Gempa Aceh 26 Desember 2004 dan Gempa Yogya 27 Mei 2006″, Seminar HAKI Medan, 9 Juni
  26. Imran, I., (2006). “Evaluasi Kondisi Struktur Jembatan Beton Eksisting”, Prosiding Seminar Sehari ‘Kinerja Jembatan’, HAKI Riau dan HPJI Riau, Pekanbaru 13 Maret
  27. Hoedajanto, D., (2006). “Peranan Organisasi Profesi dalam Peningkatan Kualitas SDM Teknik Sipil di Indonesia”, Prosiding Pekan Interaksi Ilmiah PII 2006 HMS ITB, Bandung 27 Februari -“ 1 Maret
  28. Irsyam, M., Kartawiria, A., Surono, A., (2006). “Tinjauan Aspek Geoteknik dalam Disain dan Pelaksanaan Konstruksi Pondasi Jembatan Cikubang dan Cipada”, Prosiding Pekan Interaksi Ilmiah PII 2006 HMS ITB, Bandung 27 Februari – 1 Maret
  29. Imran, I., Suardjana, M., Aryanto, A., Rahayu, B., Hadi, T., Rusdiman, (2006). “Jembatan Cisomang dan Cikubang: Aspek Perencanaan dan Pelaksanaan”, Prosiding Pekan Interaksi Ilmiah PII 2006 HMS ITB, Bandung 27 Februari – 1 Maret
  30. Imran , I ., Hoedajanto, D., Kusumastuti, D., (2005). “Baja Tulangan Vanadium Vs Baja Tulangan Tempcore: Perbandingan Karakteristik Mekanik”, Prosiding HAKI 2005, Seminar Teknik Tradisi dan Inovasi, Jakarta 23-24 Agustus.
  31. Hoedajanto D., (2005). “Makna Profesionalisme Dalam Penerapan State-of-The-Arts Teknik Struktur Tahan Gempa di Indonesia,” Prosiding Lokakarya Pengajaran Konstruksi Beton dan Mektek, ITS, Surabaya, 13 Juli
  32. Imran, I., Budiono, B., Adhi, K., Rusdiman, Aryanto, A., (2005). ”Sistem Jembatan Girder Menerus Studi Kasus pada Perencanaan Jembatan Cisomang”, Prosiding Seminar Nasional Rekayasa Material dan Konstruksi Beton, Bandung 4 Juni.
  33. Antonius, Imran, I., Setiyawan, P., (2005), “Efek Konfigurasi Tulangan Lateral terhadap Perilaku Kekuatan dan Daktilitas Kolom Beton Mutu Normal dan Mutu Tinggi”, Prosiding Seminar Nasional Eksperimen Laboratorium Komputasi dan Aplikasi dalam Bidang Teknik Sipil, UII, Yogyakarta, 28 Mei (ISBN 979-3347-11-2)
  34. Imran, I., Hoedajanto, D., dan Suharwanto, (2005).”Beberapa Pelajaran dari Gempa Aceh; Tinjauan Kinerja Dua Bangunan Perkantoran di Banda Aceh”, HAKI, Seminar Sehari Pelajaran dari Gempa & Tsunami, Jakarta 25 Mei.
  35. Imran I., dan Hoedajanto D., (2004), “Ketentuan Mengenai Perencanaan Campuran Beton dan Penerimaan Beton di Lapangan Berdasarkan SNI 03-2847-2002,”Prosiding HAKI 2004, Excellence in Construction, Jakarta, 24-25 Agustus.
  36. Imran I., Purwadaria S., and Sulistyono S., (2004). “Assessment on The Effectiveness of Galvashield As A Sacrificial Anode for Reinforcing Bars,” Prosiding Seminar Nasional, Kegagalan pada Bangunan dan Konstruksi Beton Akibat Korosi, Balai Besar Bahan dan Barang Teknik, Bandung, 29 Juli.
  37. Imran I., (2004). “Tata Cara Perhitungan Struktur Beton untuk Bangunan Gedung SNI 03-2847-2002,” Prosiding Seminar Implementasi Peraturan Beton dan Peraturan Baja Terbaru Indonesia dan Perkenalan Program MIDAS, UNPAR, Bandung, 24 Juli.
  38. Imran, I., Zulkifli, B., Juliano (2003), “Analisis Hubungan Momen dan Kelengkungan pada Pemampang Balok Komposit Penuh dan Parsial”, Prosiding dan Pameran HAKI
  39. Imran, I., (2002), “Perhitungan Puntir Menurut Peraturan Beton Indonesia yang Baru”, Prosiding pada Seminar dan Pameran HAKI – Profesionalisme dalam Dunia Konstruksi Indonesia, Jakarta, 20-21 Agustus, pp. E1-E13, (ISBN No. 979-95080-7.X)
  40. Imran, I., Simatupang, P.H., (2002), “Perilaku Geser Balok Beton Bertulang yang diberi Perkuatan Luar dengan menggunakan Lembaran Serat Aramid”, Prosiding pada Seminar Nasional ‘Perkembangan Terkini Perencanaan Beton Bertulang’ – 70th Prof. Ir. Rachmat Purwono, MSc., ITS – Surabaya, 14 Agustus, pp. 64-73 (ISBN 979-96246-7-4)
  41. Hoedajanto D., (2003). “Aspek Resiko dan Keamanan dari Teknologi Jembatan Laut dan Tunnel untuk Selat Sunda” Prosiding Semiloka Infrastruktur Lintas Selat Sunda, ITB, 27 Februari
  42. Imran, I., dan Suhud, R., (2001), “Usulan Penyempurnaan Tata Cara Penghitungan Struktur Beton untuk Bangunan Gedung SNI-03-2847-1992″, Jakarta, 28 Agustus.
  43. Purwadaria, S., Imran, I., Zulhan, Z., Mubarok, M.Z., (2001), “Peningkatan Durabilitas Struktur Beton dengan Meningkatkan Ketahanan Korosi Baja Tulangan dalam Struktur Beton yang terendam Air Laut”, Proceeding pada Seminar Nasional Korosi 2001, Bandung, 21 – 22 Juni, hal. XXI – 1 s.d. XXIII – 21.
  44. Mubarok, M.Z., Rohman, F.D., Imran, I., Purwadaria, S., (2001), “Prediksi Waktu Inisiasi Korosi Baja Tulangan dalam Struktur Beton yang Terendam Air Laut”, Proceeding pada Seminar Nasional Korosi 2001, Bandung, 21 – 22 Juni, hal. XXIII – 1 s.d. XXII I- 20.